|
Detalhes do produto:
Condições de Pagamento e Envio:
|
Precisão: | +/-10mm | Diâmetro: | 18mm |
---|---|---|---|
Material: | PVC | Cor: | Amarelo |
Vendendo unidades: | Único artigo | Único tamanho do pacote : | 29X29X25 cm |
Único peso de efetivação: | 20,000 quilogramas | Tipo do pacote: | Caixa |
Realçar: | Sensor nivelado ultrassônico da medida do PVC,sensor nivelado ultrassônico da medida de 18mm,sensor 20mA piezoelétrico ultrassônico |
High Accuracy Ultrasonic Sensor Level Measurement With Pipe PVC Housing
Highlights
Technical data | |
General Specifications | |
Sensing distance | 100…1000mm |
Adjustment range | 100…1000mm |
Unusable area | 0…80mm |
Standard target plate | 100mm×100mm |
Transducer frequency | |
Response delay | About 195ms |
Indicators/Operating means | |
LED blue | Power on |
LED yellow | Flashing:program function object detected |
LED red | permanently red: Error Red,flashing:object not detected |
Electrical specifications | |
Operating voltage UB |
10 … 30 V DC
4.2 … 5.5 V DC
|
No-load supply current | ≤20mA |
Electrical Interface | M12-4PIN |
Dimensions
|
M18 X 33 |
Output | |
Output type |
1 switching PNP output
1 analog output
(current or voltage)
1 digital output
(RS232/485 or UART
TTL)
|
Rated operational current | 200mA,short-circuit/overload protected |
Default setting | 80mm----0V/4mA, 2000mm----10V/20mA |
Voltage drop | ≤ 3V |
Repeat accuracy | ≤ 1% |
Switching frequency f | ≤ 4HZ |
Range hysteresis H | 1% of the set operating distance |
Temperature influence | ± 1.5% of full-scale value |
Ambient conditions | |
Ambient temperature |
-40°C to 70°C
|
Storage temperature | -40…85℃(233...358K) |
Mechanical specifications | |
Protection grade | IP65 |
Connection | V1 connector(M12×1),4-pin |
Material Housing | PVC |
Transducer |
epoxy resin/hollow glass sphere mixture; foam polyurethane,cover PBT |
configuration
|
Command(digital output)
|
Electrical Interface
|
M12-4PIN
|
Standard conformity |
EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Installation conditions
If the sensor is installed at the environment temperature fall below 0℃,It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.
Pessoa de Contato: Dream Chan
Telefone: 86-755-83747109